Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discrete, doesn't employ keys or LEDs and is concealed in the wiring of the vehicle.
The user can also deactivate the system for a short period of time by using Transport Mode when renting out their car. This guide will guide you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your car and protected by a PIN code you set. ghost 11 immobiliser to thieves using diagnostic scanners or other modern methods, and is unable to be disabled by circuit cuts.
The system is easy to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. When the battery is disconnected, the installer can start working safely. Hand tools are the most basic to be used to ensure precise connections. A multimeter can be used to test electrical values. Insulation tape and cable tie are vital to secure connections and keep wiring neat. The Ghost Immobiliser user's manual will provide specific guidelines specific to your particular model.
It is essential to choose an area for grounding that is free of paint or debris during installation. The installer must be sure that the immobiliser's H and CAN L wires are connected to the correct ports on your vehicle's ECU. Depending on the model, these wires could require soldering or plugged in. Using a quality connector is recommended to ensure a durable and reliable connection.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To do this, the customer has to hit the service button on the dashboard five times in a matter of 2 seconds. Once this is done the system will verify by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent their vehicles frequently through platforms like Turo. Immobilisers can lower insurance rates, as it reduces the risk of theft.
Getting Started
If you are looking for a solution that will secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from starting even when someone copies or steals your key. It is possible because of its advanced technology, which prevents the engine from starting until the correct PIN code has been entered.
The device connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will not lose its value if you ever want to sell it.
Installing a ghost immobiliser is an easy procedure, but it is important to follow the steps carefully to avoid electrical issues and system malfunctions. First, you need to locate and determine a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a strong connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to prevent short circuits of electricity.
After the wires are connected, you can connect the battery and begin the engine to check whether the immobiliser is functioning. Once everything is working properly then you can put it in a secure place under the dash or somewhere else in the vehicle. Be sure to cover it properly to stop a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent for car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is also simple to use and can be set into an auto valet mode so that your automobile isn't activated if you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of your vehicle's factory settings.
The system is also unnoticeable by thieves using diagnostic scanning tools. The system does not send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It also doesn't require modifications to your existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. After this, you can start your car and drive away with peace of mind.
Once installed The Ghost Immobiliser can safeguard your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to hand your vehicle to service or valet parking.
To complete the Ghost Immobiliser installation, you'll need find a source of constant power (12V) and an earthing point. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This reduces the risk of theft by potential thieves. Make sure you verify the position of these points to avoid making mistakes and mark them with an adhesive or label. Examine every connection for signs that they are wearing out. Make sure all connections are securely in place, and are properly protected. Don't forget to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit is functioning properly and that all connections are secure and insulated. Be sure to correct any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your car's ECU in order to prevent the motor from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning and hacking and other typical tactics thieves employ to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unique features and secluded design make it a preferred choice for car lovers and security-conscious drivers too.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation procedure. A good starting point is to consult the vehicle's wiring diagram that will serve as a guideline to locate and connecting the required wires. You'll need to determine the grounding and power sources. Once you've found them, you will need to mark the points so that they are easy to identify during installation. It's essential to use high-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter will check electrical values, and ensure safety. Cable tie and insulation tape will ensure that all connections are tidy. Finally, a user manual will provide specific instructions tailored to your Ghost model.
It is important to test the system before installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser is working according to plan, and prevents unauthorised vehicle starts. It is recommended that you perform this step regularly as part of your routine inspections of your vehicle to ensure that the system is always functioning properly.
After the installation is completed, you can drive your vehicle with confidence. The Ghost will help keep your precious possessions safe from would-be thieves, ensuring that nobody can take off with your vehicle without the correct PIN code. The Ghost can also be used with a tracker approved by Thatcham to detect any attempts to steal or tamper that could lead to the location of your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those made by most major manufacturers. If you are looking to secure your vehicle with this innovative device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards in the installation of our products. This assures insurance companies, customers, and law enforcement that all installations are performed safely and in a correct manner.